| Packer Wheels |
- Semi-pneumatic rubber tires
- Sealed double ball bearing in wheels
- Several tire configurations
|
| Packer Arm |
- Adjustable spring tension on packer arms ranges from 0 -130 lbs./arm at 2” of
upward travel
- 5” vertical movement if going over obstacles
|
| Model 9910 Trailing Arm |
- Pressure adjustable coil springs
- 10” vertical movement (approximately)
- For and Aft adjustment arm has 18” of travel
- Lateral mounting fully adjustable
|
| Swivel Brackets |
- Greaseless bushings
- 30 degrees travel from side to side
- Can be locked solid if desired
|
| Walking Axles |
- May be used with double wheel packer assembly while packing two different opener rows
- Walking axle pivots on polyurathane bushings and a stainless 3/4” steel pin
- Adjustable wheel spacing from 7 1/2” to 12” center to center on packers
- 3” wide wheel is the only exception where the spacing can only go as close as 8”
|
| Harrows |
- Double tines 8” on center 16” long
- Optional 1 or 2 row in front of packers
- optional 3 row heavy duty for summerfallowing
|
| Color |
|
| Weights |
- Main arm assembly Model 9910
- Double wheel assemblies
- 37 lbs. with 2” x 13” flat packers
- 52 lbs. with 2” x 16” flat packers
- 47 lbs. with 4” x 14” V-packers
- 37 lbs. with 2” x 13” flat packers
- 41 lbs. with 2” x 14” V-packers
- Single wheel assemblies on average
- Tubing 2.5x2.5x25
- Two row harrows
- Single row harrows
- Bourgault adaptor with upright
|